Axxess
Axxess AXDSPX-A2B2 A2B DSP Interface for Ford B&O 2018-Up
Axxess AXDSPX-A2B2 A2B DSP Interface for Ford B&O 2018-Up
Couldn't load pickup availability
Buy with the right details confirmed
Confirm the size, power, connections, and included or separately required parts described on this page.
- Authorized retailer New, authentic product from MCOR Automotive.
- Fast U.S. shipping Review shipping details
- Expert help since 2004 Ask MCOR before you order
- Clear return terms Review the return policy
Axxess AXDSPX-A2B2 is an AXDSP-X digital signal processor data interface package for select Ford models 2018-Up with Bang & Olufsen A2B amplifiers. It helps correct factory-radio audio processing, provides tunable preamp outputs for aftermarket amplifiers, and supports retained factory audio functions where applicable.
At a Glance
- DSP data interface package for select Ford models 2018-Up with Bang & Olufsen A2B amplifiers
- Designed for select vehicles with a B&O A2B amplifier
- Package includes vehicle-specific harnessing for a cleaner integration
- 6 inputs and 10 individually assignable outputs
- Selectable 31-band graphic EQ or 5-band parametric EQ on each channel
- Selectable high-pass, low-pass, or bandpass filters
- Independent equalization and time delay on each output
- Clipping detection and limiting circuits
- Bass knob included
- Settings adjusted wirelessly through the AX-DSP-XL app
- Micro-B USB updatable
- Factory amplifier does not need to be retained
- Chimes and voice prompts route through the aftermarket amplifier
- Retains SYNC voice prompts when equipped
System / Wiring Notes
- Designed for select vehicles with a B&O A2B amplifier
- Install location: at the factory amplifier
- Designed to be used with the factory radio in supported applications
- Factory prompts, chimes, parking alerts, OnStar, SYNC, Uconnect, or similar retained features depend on vehicle equipment and proper configuration
- DSP setup and tuning must be completed in the AX-DSP-XL app for the specific vehicle and audio system
Exact Vehicle Compatibility
Find your vehicle below, then match the model year and factory-equipment details in the same row. Factory radio, amplifier, navigation, trim, speaker location, and connector differences can change which installation parts are required. If anything differs, contact MCOR before ordering.
| Make | Model | Years | Factory Equipment / Qualifier |
|---|---|---|---|
| Ford | Bronco | 2021-2023 | B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. |
| Ford | Bronco Sport | 2020-2023 | B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. |
| Ford | EcoSport | 2018-2022 | B&O system; Factory amplifier location: Passenger Side Trunk Behind Seat. |
| Ford | Edge | 2019-2023 | B&O system; Factory amplifier location: Passenger Side Rear, Above Wheel Well. |
| Ford | Escape | 2020-2023 | B&O system; Factory amplifier location: Passenger Side Rear Quarter Panel. |
| Ford | Expedition | 2018-2024 | B&O system; Factory amplifier location: Left Rear Quarter Panel |
| Ford | Explorer | 2020-2023 | B&O system; Factory amplifier location: Left Rear Quarter Panel |
| Ford | F-150 | 2018-2020 | B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. |
| Ford | F-150 | 2021-2024 | B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. |
| Ford | F-250 | 2020 | B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. |
| Ford | Mustang | 2024-2026 | B&O system; Factory amplifier location: Left rear corner panel |
| Ford | Ranger | 2019-2023 | B&O system; Factory amplifier location: Driver Side Rear Floor, Behind Rear Seat. |
Fitment note: Year and model alone are not always enough to confirm compatibility. Match every factory-equipment qualifier shown for your vehicle, and contact MCOR Automotive if the radio, amplifier, navigation, speaker, camera, trim, or connector details are uncertain.
Installation Notes
- Verify the vehicle is in the listed application range and has the required factory audio system before purchase
- Do not assume compatibility across similar vehicles, factory radios, amplifier packages, screen sizes, or radio codes
- Confirm exact vehicle fitment, factory radio, factory amplifier system, trim level, radio code, and connector style before purchase
- Additional installation parts may be required depending on the vehicle, factory equipment, and system design
- Programming, firmware updates, app setup, or DSP tuning may be required for proper operation
- Professional installation and tuning are recommended for best results
- Check the current Axxess vehicle fit guide and manufacturer instructions before installation
What’s in the Box
- A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, amplifier bypass harness, bass knob, and manufacturer instructions
Technical Specifications
- Brand: Axxess
- Model: AXDSPX-A2B2
- Product Type: DSP data interface with vehicle-specific harness
- Application: select Ford models 2018-Up with Bang & Olufsen A2B amplifiers
- Compatibility Type: Vehicle-specific
- Factory System Requirement: Designed for select vehicles with a B&O A2B amplifier
- Install Location: at the factory amplifier
- DSP Platform: AXDSP-X
- Inputs: 6
- Outputs: 10 individually assignable
- EQ: 31-band graphic EQ or 5-band parametric EQ
- Filters: High-pass, low-pass, or bandpass
- Selectable Slope: 12, 24, 36, or 48 dB per octave
- Delay: Up to 10 ms per channel
- Tuning: Axxess AX-DSP-XL app
- Update Method: Micro-B USB
- Included Control: Bass knob
Identifiers & Packaging
- MPN: AXDSPX-A2B2
- UPC: 086429383993
- Sold As: Each
- Included Components: A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, amplifier bypass harness, bass knob, and manufacturer instructions
Why Buy From MCOR Automotive
- Authorized retailer for the brands we sell
- Specialists in vehicle audio integration, radio replacement parts, and installation accessories
- 22+ years of professional automotive electronics experience
- Expert support for compatibility verification and proper setup
Share
