Kicker CompVT 10-Inch (25cm) Subwoofer, SVC, 4-Ohm, 350W

KICKER 43CVT104 CompVT 10-inch 4-ohm Subwoofer SVC Slim Shallow Car Subwoofer Sub || KEY FEATURES: 10″ 4-ohm subwoofer injection-molded polypropylene cone with Santoprene rubber surround power handling: 350 watts RMS peak power handling: 750 watts sensitivity: 87.2 dB top-mount depth: 4-1/4″ sealed box volume: 0.8 – 3.0 cu. ft. ported box volume: 1.25 – 1.75 cu. ft. grille not included Sensitivity : 87.2 dB. Minimum Sealed Enclosure : 0.8 cu. ft.. Maximum Sealed Enclosure : 3 cu. ft.. Minimum Ported Enclosure : 1.25 cu. ft.. Maximum Ported Enclosure : 1.75 cu. ft.. Subwoofer Design : Round / Circle. Round / Circle. || SPECIFICATIONS Size : 10 -inch | Impedance : 4 ohms | Cone Material : Polypropylene | Surround Material : Rubber | Free-Air : No | Dual Voice Coil : No | Sensitivity : 87.2 dB at 1 watt | Frequency Response : 25 – 500 Hz | Max RMS Power Handling : 350 | Peak Power Handling (Watts) : 750 | Top Mount Depth (inches) : 4 1/4 | Bottom Mount Depth (inches) : N/A | Cutout Diameter or Length (inches) : 9 1/16 | Vas (liters) : 37.14 | FS (HZ) Qts : 0.44 | Xmax (millimeters) : 10.5 | || 10" CompVT 4 Ohm. The CompVT 10-Inch Subwoofer is a 4O slimline driver.. The woofers stiff, injection-molded, modified-spoke cone is shaped to provide maximum excursion from a slender basket, allowing better strength and durability.. The CompVT 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.. || Kicker 43CVT104 10" 800 Watt Single Voice Coil 4-Ohm Car Stereo Subwoofer. Power Handling : Peak : 800 watts. RMS : 400 watts. Size : 10". Shallow-mount subwoofer with true high- performance. This sub is slim enough to be mounted in virtually any vehicle. Delivers extreme bass with minimum depth. Four-layer voice coil for max power handling Dark gray modified-spoke cone with bracing for clear bass response. Ventless solid-pole design for direct mount to enclosure rear wall. || Dark gray modified-spoke cone with bracing for clear bass response. Ventless solid- pole design for direct mount to enclosure rear wall. Steel clearance adapter plate replaces part of enclosure wall depth to further lessen depth. Injection molded SoloKon cone. Ribbed Santoprene surround. High-temp coil wire. Slender, strong steel basket with coil-cooling perimeter venting Durable Spiralead tinsel leads. Stitched surround for enhanced cone-to-surround strength. Tough double-stitched surround